All replacement plumbing parts at Waikiki Banyan must conform at 
minimum to the following standards.

I. WATER PIPING
	A. Copper pipe Type L or K Hard Drawn
	B. Lead free solders – no concealed compression joints
	C. All valves to be accessible for servicing
	D. All tub, tub/shower and shower valves shall have integral stops
	E. All tub, tub/shower and shower valves shall be anchored to 
	   building structure
	F. Every fixture shall have separate isolation valve
	G. Every fixture shall have air chamber except Ice Maker
	H. Water supply for icemakers shall be copper 1/4 inch minimum, may
	   be soft copper, no plastic tubing
	I. Saddle valves are not to be used for icemaker connections
	

II. DRAIN WASTE & VENT MATERIALS
	A. Cast iron with no hub connection
	B. Copper type L with lead free solder joints
	C. Galvanized Iron pipe with Durham fittings
	D. All transition between dissimilar materials shall be with
	   transition couplings
	E. All traps shall be metal
	F. No PVC or ABS allowed


III. VALVES AND FAUCETS
	A. All valves and fittings shall be rated 125 psi or better
	B. All tubs, tub/shower and shower valves shall have integral stops
	   and integral balance spools.  Balance spools and stops shall be 
	   accessible
	C. All kitchen, bar, and lavatory faucets shall be 2 handle only
	D. All supply connections to faucets shall be with metal
	   connections


IV. FIXTURES
	A. Tubs shall be porcelain, steel, cast iron, americast, or
	   fiberglass
	B. Lavatories shall be cast iron, porcelain, steel, molded stone,
	   molded marble or fiberglass
	C. All water closets shall be 1.6 gallon flush